Rod Stewart
Active Member
Hi All;
I have parted out my wrecked '07 Road King, and now a bunch of stuff is sold, but I still have the 103" engine and 6 speed tranny. If it doesn't sell, It would be real nice to have this setup in my '04 Classic, but I don't know if its possible or practical. Is there a show-stopper that would make this impossible?
[I originally asked this question in another thread in the Touring bikes forum, but did not get any answers. So I thought I would post it here, though I don't guess it's really what most would consider an "Extreme Mod".]
I think mechanically it is doable because its the same generation frame, though I believe the '07 had some swingarm frame mods; not sure.
Intake, fuel supply, exhaust and throttle/clutch cableing should be straight forward enough.
Most electrical should be plug n' play, but not all. I will likely use the '07 throttle body, but I know the injector connectors are different. Could use the '04 throttle body if there are too many differences. I have the '07 ECM but I don't know how compatible it will all be with the rest of the '04 wiring. Maybe I can use the '04 88" ECM with a 103" map in the Cruise Commander.
Any thoughts and/or suggestions/tips would be greatly appreciated!
Thanks,
Rod
I have parted out my wrecked '07 Road King, and now a bunch of stuff is sold, but I still have the 103" engine and 6 speed tranny. If it doesn't sell, It would be real nice to have this setup in my '04 Classic, but I don't know if its possible or practical. Is there a show-stopper that would make this impossible?
[I originally asked this question in another thread in the Touring bikes forum, but did not get any answers. So I thought I would post it here, though I don't guess it's really what most would consider an "Extreme Mod".]
I think mechanically it is doable because its the same generation frame, though I believe the '07 had some swingarm frame mods; not sure.
Intake, fuel supply, exhaust and throttle/clutch cableing should be straight forward enough.
Most electrical should be plug n' play, but not all. I will likely use the '07 throttle body, but I know the injector connectors are different. Could use the '04 throttle body if there are too many differences. I have the '07 ECM but I don't know how compatible it will all be with the rest of the '04 wiring. Maybe I can use the '04 88" ECM with a 103" map in the Cruise Commander.
Any thoughts and/or suggestions/tips would be greatly appreciated!
Thanks,
Rod